CAS CI-100A - 4.3 USER Submenu (Continued)

CI-100A Indicator Operation & Service Manual
────────────────────────────────────────────────────────
CAS-USA Corporation
www.cas-usa.com 14
PRINT
received; (5)PRT.CMD= output after PRINT key
pressed or request command received;
(6)STABLE=output after scale is stable;
Note: use PRINT or CMD to output data, the
scale must be stable.
CMD
PRT.CMD
STABLE
LAYOUT
MULTPL
MULTPL
com2 output content and format set:
(1)MULTPL= the following selected item in
OUT2 will be output use defined format;
(2)SINGLE= only displayed content and current
status will be output, it’s compatible with
NCI-SCP01; (3) EH-SCP= Command
–response mode, similar to Toledo PS60
protocol; （4）SCP-12 = only displayed content
and current status will be output, it’s compatible
with NCI-SCP12（NCI3835）;
SINGLE
EH-SCP
SCP-12
OUT2 SCAL.ID
YES
NO
Yes/No=enable/disable output scale's ID
number, Prompt is “SCALE ID”
NO
GROSS
YES
NO
Yes/No=enable/disable output gross weight.
Prompt is “GROSS”
NO
TARE
YES
NO
Yes/No=enable/disable output tare weight.
Prompt is “TARE”
NO
NET
YES
YES
Yes/No=enable/disable output net weight.
Prompt is “NET”
NO
PERCNT
YES
NO
Yes/No=enable/disable output weight
percentage. Prompt is “PERCENTAGE”
NO
UPCTWT
YES
NO
Yes/No=enable/disable output weight of 1%
percentage. Prompt is “1% REF WT”
NO
COUNT
YES
NO
Yes/No=enable/disable output counts. Prompt is
“QUANTITY”
NO
PCWT
YES
NO
Yes/No=enable/disable output piece weight.
Prompt is “PIECE WT”
NO
BMI
YES
NO
Yes/No=enable/disable output height and BMI.
Prompt is “HEIGHT” and “BMI”
NO
ACCUMU
YES
NO
Yes/No=enable/disable output accumulation
times and total. Prompt is “ACC. N” and
“TOTAL”
NO
DATE
YES
NO
Yes/No=enable/disable output date. Prompt is
“DATE”
NO
TIME
YES
NO
Yes/No=enable/disable output time. Prompt is
“TIME”
NO
AD.CODE
YES
NO
Yes/No=enable/disable output ADC's code.
Prompt is “A/D CODE”
NO
BAT.VOL
YES
NO
Yes/No=enable/disable output voltage of
battery. Prompt is “VOLTAGE”
NO
STATUS
YES
NO
Yes/No=enable/disable output scale's status.
Prompt is “STATUS”
NO