15
● The sampling operation is completed while stable display appears as below :
※
The larger sample size, the more accurate unit weight
※ Press SMPL key to recomputing unit weight during in counting process if the setting of
“Unit Weight Recomputing” set to “on”
2) Known unit weight
● Input the known unit weight. (ex. 40g)
● Press U.Wt key to complete sampling operation & enter into counting mode.
Note : The system default is “Unit Weight”. If the “U.WT” key is clicked when the value (ex : 0) in
COUNT window is blinking, then the numerical value input will be as “Unit Weight”.
To Next Page
Loading...
