CAS ECB Series - Zero Tracking Range

2
7
B. Zero Tracking Range
● Keep pressing ENTER key in USER PROGRAMMING MODE until the display appears
as below.
●
There are 5 options, and Pressing MOVE key is possible to rotate among the options.
(Default setting: 2)
( 0=off, 1=0.5d, 2=1d, 3=2d, 4=3d)
● If you want to exit, press C key to confirm and go back to normal weighing mode.
However, if you want to keep going to set other menus, press ENTER key to confirm and
move on next.
※
Please turn off the scale after setting.
C. Zero display range
● Keep pressing ENTER key in USER PROGRAMMING MODE until the display
appears as below.
● There are 5 options, and Pressing MOVE key is possible to rotate among the options.
(Default setting: 2)
( 0=off, 1=0.5d, 2=1d, 3=2d, 4=3d)
● If you want to exit, press C key to confirm and go back to normal weighing mode.
However, if you want to keep going to set other menus, press ENTER key to confirm and
move on next.
※
Please turn off the scale after setting.