21
F. Weight/Quantity accumulation
● Place item to be weighed / counted on the platform.
● Press ADD key. Display images will be shown as below in sequence.
● Press TOTAL key or wait approx. 2 seconds, the scale will return to counting mode.
※
The weight window should be zeroed before the next accumulation.
● Following to the process above, you can add up whatever you want continuously.
After then press TOTAL key. Then the total weight will be shown on WEIGHT window,
the total count will be shown on COUNT window and the number of accumulation
will be shown on UINT WEIGHT window.
● Press TOTAL key to enter into accumulation status mode. At this moment, total accumulated
weight is shown on WEIGHT window, total accumulated times is shown on UNIT WEIGHT
window and TOTAL PIECES is shown on count window.
Press TOTAL key again to go back to counting mode.
To Next Page
Loading...
Need help?
General
