22
※ Clear accumulation
Press TOTAL key to enter into accumulation status mode and press CLEAR key
to clear all accumulated data.
1) The display window will show ”---OL---“when accumulated value exceed the
display range.
2) The maximum accumulation time is 99.
3) The weight window should be zeroed before the next accumulation.
G. Preset counting check range
User can set a Hi – Lo range for checking the quantity of counting result, when the number
of objects on the platform meet the condition of the range, the alarm will sound beeps
repeatedly.
1) Procedures
● Doesn’t matter what something is on the platform. Press ALARM key. Then the display
image is shown as below.
● Input desired high limit value by using numeric keys. (ex. 200pcs)
(It is possible to erase wrong value as using CLEAR key.)
To Next Page
Loading...
Need help?
General
