25
● Press U.Wt key to complete this procedure and return to normal weighing mode.
※
Note
: 1) An error massage “E5” appears in weight window when the LO value is set
higher than HI value.
2) When both HI and LO values are needed, they must be kept same decimal
digits. (Ex. HI=10kg, LO=9.8kg, then the values must be set as “HI=10.0kg,
LO=9.8kg”.)
※Clear high / low value preset
Input “0” or Clear key to delete prior HI/LO values, when you are in limit setting mode.
To Next Page
Loading...
