CAS ECB Series - Page 32

33
1.Inside type
The alarm sounds beeps only when either total weight or total count is inside the set range.
Ex) checking the count / weight
(If the count / weight is in between LO and HI values, the value on count display window
will flicker)
2.Outside type
The alarm sounds beeps only when either total weight or total count is outside the set range.
Ex) checking the count/weight when over HI value
(If the count/weight is over HI value, the value on count display window will flicker)
Ex) checking the count/weight when under LO value
(If the count/weight is under LO value, the value on count display window will flicker)
※
Please turn off the scale after setting.