14 / 44
5-3. Function Setting
To make more accuracy performance of NT-301A, through this Function setting.
Step 1. Enter to Function setting mode.
Turn on the Power + 3 KEY display
Press 3 KEY display
Press CLEAR KEY to start “F-function Mode”.
Step 2. Change the F-Function No.
To change the F-function No., press CLEAR KEY.
Whenever pressing CLEAR KEY, Function No. will be changed
If you want to move certain function No. directly, press function No. with keypad and press
CLEAR KEY.
Step 3. Change the Set value.
Input new set value with keypad, and press ENTER KEY to save new setting.
If you don’t press ENTER KEY, after changing the set value, the new set value will not be saved.
Step 4. Exit from Function setting mode.
Press 0 KEY + CLEAR KEY + 0 KEY to exit function mode.
To Next Page
Loading...
