Casio CT-X3000 - Page 114

EN-113
Configuring Function Settings
Function Setting Item List
Function Name Display Settings See Page
Touch Response Touch 1 to 4 EN-29
Chord Mode ChordMod 1 to 6 EN-50
Phrase Pad Phr Pad – EN-54
Phrase set switching Phr Set 1 to 25 EN-54
Pad 1 Pad 1 –
EN-56
Looped playback Loop On, Off
Key shift KeyShift –24 to 24
Timing sync TimingSy 1 to 3
Chord Sync ChordSyn On, Off
Break point Break Pt 1 to 12
Pad 2*
1
Pad 2 –
Pad 3*
1
Pad 3 –
Pad 4*
1
Pad 4 –
Controllers Cntrller – –
Pedals Pedal –
EN-30
Pedal 1 effect Pd1Efect 1 to 4
Target part for Pedal 1 effect Pd1Enabl –
Pedal 1 effect on/off for tone part UPPER 1 U1Pd1Enb On, Off
Pedal 1 effect on/off for tone part UPPER 2 U2Pd1Enb On, Off
Pedal 1 effect on/off for tone part LOWER 1 L1Pd1Enb On, Off
Pedal 1 effect on/off for tone part LOWER 2 L2Pd1Enb On, Off
Pedal 2 effect Pd2Efect 1 to 4
Target part for Pedal 2 effect Pd2Enabl –
Pedal 2 effect on/off for tone part UPPER 1 U1Pd2Enb On, Off
Pedal 2 effect on/off for tone part UPPER 2 U2Pd2Enb On, Off
Pedal 2 effect on/off for tone part LOWER 1 L1Pd2Enb On, Off
Pedal 2 effect on/off for tone part LOWER 2 L2Pd2Enb On, Off
Pedal 2 type Pd2 Type 1 to 3
Expression pedal calibration ExPCalib –
Pitch Bend PitchBnd –
EN-33
Pitch Bend Range Range 0 to 24
Tone Part UPPER 1 pitch bend on/off U1Enable On, Off
Tone Part UPPER 2 pitch bend on/off U2Enable On, Off
Tone Part LOWER 1 pitch bend on/off L1Enable On, Off
Tone Part LOWER 2 pitch bend on/off L2Enable On, Off
CTX5000_3000_EN.book 113 ページ ２０１８年２月２６日 月曜日 午後３時５６分