170
Partition Properties Screen
Figure 3-45
Mount Button
This button mounts the partition.
Dismount Button
This button dismounts the partition.
Format Button
This button displays the Format window to enable formatting on the partition. It is not possible if
the partition is mounted.
Scan Button
This button displays the Scan window to enable verification check for the partition.
Defrag Button
This button displays the Defrag window to enable defrag for the partition.
Notes:
• This utility doesn’t carry out the User Disk Clear. See “Reset” for detail.
• The
utility that carries out the User Disk Clear is available. See “DiskClean” for detail.
To Next Page
Loading...
