131
SETTINGS & TOOLS
2. Press 2 Tools, 1 Voice Commands.
3. Follow the prompts to set up your voice command(s).
Shortcut
You can directly access the Voice Commands function by
pressing the Voice Commands Key C.
NOTE
Pressing the Left Soft Key [Info] or saying the word
“Information” displays and reads out a detailed explanation
about the currently selected voice command (when Readout is
selected as the Prompts mode).
k Call <Name or #>
To make a call, say, “Call,” and the command system will prompt
you for the name or number. If the contact has more than one
number, the system will prompt you for the number type. You can
state the name and number type of the contact (for example, “Call
John Work”) to access the contact’s phone number directly.
k Send <MSG Type>
To create a message, say, “Send,” and the command system will
prompt you for the type of message you want to send. You can
state the name and number of the contact, the message type,
and the contact name, number, or group (for example, “Send text
message to Bob”) and the message will automatically start. If the
name has more than one number, the system will prompt you for
the number type.
To Next Page
Loading...
