114
OTHER RECORDING FUNCTIONS
5.
Press the shutter button to start audio
recording.
• The green operation lamp will flash while recording is
in progress.
6.
Recording stops after about 30 seconds or
when you press the shutter button.
IMPORTANT!
• Audio snapshot recording is not supported (audio
cannot be recorded) for the following types of
recording: “X3” self-timer recording (Triple Self-
timer), continuous shutter recording.
1.
In a REC mode, press [MENU].
2.
Select the “REC” tab, select “Audio Snap”,
and then press [왘].
3.
Use [왖] and [왔] to select “On” and then press
[SET].
• This enters the Audio Snapshot mode.
• Selecting “Off” enters the Normal Snapshot mode
(no audio).
4.
Press the shutter
button to record the
image.
• After the image is
recorded, the camera
enters audio recording
standby, with the image
you just recorded on the
monitor screen and
displays a indicator.
• You can cancel audio recording standby by pressing
[MENU].
Remaining recording time
C
To Next Page
Loading...
Need help?
General
