BASIC IMAGE RECORDING
61
Using the easy Mode
The easy mode eliminates troublesome setups. This mode
is recommended for those who are new to digital imaging.
1.
In a REC mode, align the mode dial with “ ”
(page 55).
• This enters the easy mode and causes “ ” to
appear on the monitor screen.
2.
Compose the image on the monitor screen so
the subject is within the focus frame.
3.
Press the shutter button half way to focus the
image.
• The focus frame will turn green and green operation
lamp will light when focusing is complete.
4.
After making sure that the image is focused
properly, press the shutter button the rest of
the way down to record.
■ Using the easy Mode Menu
In the easy mode, menu display is limited to flash, self-
timer, and image size settings. All other settings are fixed
automatically at preset optimum values.
1.
Press [MENU].
• The easy menu
displays larger text than
other mode menus.
2.
Use [왖] and [왔] to select the menu item you
want, and then press [SET].
• On-screen pop-up help text provides a brief
explanation of each setting.
3.
Use [왖] and [왔] to select the setting you
want, and then press [SET].
To Next Page
Loading...
Need help?
General
