95
OTHER RECORDING FUNCTIONS
3.
Press the shutter button half way.
• This causes the camera to configure the aperture
value automatically in accordance with the shutter
speed you selected. Then it focuses the image.
• The shutter speed and aperture values on the
monitor screen will turn amber when you press the
shutter button half way if the image is over-exposed
or under-exposed.
4.
When the image is focused, press the shutter
button all the way down to record.
Setting Exposure Settings Manually
In the M mode (manual exposure), you can adjust shutter
speed and aperture manually.
1.
Align the mode dial
with “M” (Manual).
2.
Use [왖] and [왔] to select the aperture value
(page 33) in the exposure panel, and then use
[왗] and [왘] to change the setting.
Shutter speed
Aperture value
Aperture value*
Depth of Field
Wide Small
F2.8 , 4.0
Shallow
Deep
* The above values are full wide angle optical zoom.
Aperture values are different at other optical zoom
settings.
ISO sensitivity
To Next Page
Loading...
Need help?
General
