120
OTHER RECORDING FUNCTIONS
Assigning Functions to the [왗] and [왘]
Keys
A “key customization” feature lets you configure the [왗]
and [왘] keys so they change camera settings whenever
they are pressed in a REC mode. After you configure the
[왗] and [왘] keys, you can change the setting assigned to
them without going through the menu screen.
1.
In a REC mode, press [MENU].
2.
Select the “REC” tab, select “L/R Key”, and
then press [왘].
3.
Use [왖] and [왔] to select the setting you
want, and then press [SET].
• After you assign a function, you can change its
setting simply by pressing the [왗] and [왘] keys.
— EV Shift (page 87)
— White Balance (page 89)
— ISO (page 123)
— Self-timer (page 74)
— Metering (page 124)
— Off: No function assigned
Turning the On-screen Grid On and Off
You can display gridlines on the monitor screen to help you
compose images and ensure that the camera is straight
when recording.
To do this:
Display the grid
Hide the grid
Select this setting:
On
Off
1.
In a REC mode, press [MENU].
2.
Select the “REC” tab, select “Grid”, and then
press [왘].
3.
Use [왖] and [왔] to select the setting you
want, and then press [SET].
To Next Page
Loading...
