93
OTHER RECORDING FUNCTIONS
2.
Use [왖] and [왔] to select the aperture value
(page 33) in the exposure panel, and then use
[왗] and [왘] to change the setting.
Aperture value
*
Depth of Field
Wide Small
F2.8 ‚ 4.0
Shallow
Deep
* The above values are full wide angle optical zoom.
Aperture values are different at other optical zoom
settings.
• You could also use [왖] and [왔] to select “EV Shift”
here, and then use [왗] and [왘] to specify an
exposure compensation value (pages 33, 87).
•
If you are using manual focus
(pages 33, 85)
, you can
also use [왖] and [왔] to select “FOCUS” (manual focus
adjustment), and then use [왗] and [왘] to focus
manually.
3.
Press the shutter button half way.
• This causes the camera to configure shutter speed
automatically in accordance with the aperture value
you selected. Then it focuses the image.
• The shutter speed and aperture values on the
monitor screen will turn amber when you press the
shutter button half way if the image is over-exposed
or under-exposed.
4.
When the image is focused, press the shutter
button all the way down to record.
To Next Page
Loading...
Need help?
General
