46
Snapshot Tutorial
ISO sensitivity is a measure of sensitivity to light.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the (ISO Sensitivity) Control Panel option,
and then press [SET].
3. Use [8] and [2] to select the setting you want and then press [SET].
NOTE
• While “Auto” is selected, Anti Shake corrects for subject movement only (page
107).
• Since higher ISO sensitivity values tend to result in digital noise in images, the
camera performs a noise filtering process. Because of this, it may take relatively
longer for the camera to finish recording an image after it is shot. You will not be
able to perform any key operation while image recording is in progress.
• In the S (Shutter Speed AE) mode, ISO sensitivity always operates according to its
“Auto” setting.
• In the M (Manual Exposure) mode, “Auto” cannot be selected.
Specifying ISO Sensitivity (ISO)
Setting
REC Screen
Icon Display
Description
Auto None
Adjusts sensitivity automatically according to
conditions.
ISO80 Lower
sensitivity
Higher
sensitivity
Slow shutter speed
Fast shutter speed
(Set for shooting in
dimly lit areas.)
Less noise
Some coarseness
(increased digital
noise)
ISO100
ISO200
ISO400
ISO800
ISO1600
ISO3200
To Next Page
Loading...
Need help?
General
