80
Using BEST SHOT
. To record with a registered CUSTOM SHOT scene
1. In the BEST SHOT Mode, select the registered “Custom Scene” (page
77).
2. Press the shutter button to shoot.
In addition to optical Anti Shake, a single press of the shutter button while HS Anti
Shake is enabled causes the camera to record multiple images and automatically
combine them. Use this feature to minimize image blur due to camera movement
under conditions where optical anti shake is not possible for some reason.
1. In the BEST SHOT Mode, select “HS Anti Shake” (page 77).
2. When you are ready to shoot, press the shutter button.
NOTE
• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
• HS Anti Shake may not operate properly resulting in blurred images if the camera
is moved more than the allowable range or if the subject moves during shooting.
• When shooting with these BEST SHOT scenes, the “ISO Sensitivity” (page 46) and
“ISO High Limit” (page 106) are fixed at “Auto”.
Shooting with High Speed Anti Shake
(HS Anti Shake)
To Next Page
Loading...
Need help?
General
