98
Advanced Settings (REC MENU)
Procedure
Enter the REC Mode * [MENU] * “
r
REC MENU” Tab *
Motion Shutter
With this feature, you can configure the camera to
shoot an image when it detects movement in the
vicinity of an icon on the monitor screen.
1. Use [8] [2] to select “1 sec” or “0.5 sec”, and then press [SET].
2. Select one of the following as the recording mode: Program Auto,
Premium Auto Pro, or HS Best Selection (BEST SHOT scene).
• Movie shooting is disabled while the HS Best Selection BEST SHOT scene is
being used.
3. Press the shutter button (if you want to shoot a snapshot) or
[0] (Movie) (if you want to shoot a movie).
The start self-timer icon will change to “ ” to indicate that the camera is in
standby for shooting.
4. Facing the camera, move your hand or perform some other movement
in the vicinity of the (start self-timer) icon on the monitor screen.
When the camera detects movement near the icon, it will automatically shoot an
image.
• To stop movie recording, press [0] (Movie) again.
Triggering a Self-timer Operation with Motion (Motion Shutter)
Setting Description
1 sec
Image is shot one second after
movement is detected.
0.5 sec
Image is shot 0.5 seconds after
movement is detected.
Off Motion Shutter disabled.
To Next Page
Loading...
Need help?
General
