Casio QT-6100 Service Manual

— 5 —
Copyright(C) 2004
CASIO COMPUTER CO.,LTD.
All rights reserved.
ROM VER. xxxxxx xxxx
CREATE xxxx-xx-xx xx:xx
QT-6100 x.xx
APL VER. xxxxxx xxxx
Version
INIT
C
7 8 9
4 5 6
1 2 3
0
OK
2. INITIALIZATION
2-1. MACHINE INITIALIZATION
2-1-1. How to initialize the terminal
Preparation:
1. All peripheral devices and terminals should be turned off.
2. Connect all of the peripheral devices (such as printer, display etc.) to terminal.
• In case of wire inline:
3. Connect all terminals by inline.
Operation:
4. Turn on all peripheral devices of a terminal
5. Turn on this terminal with pressing the initialize switch and release.
6. After releasing the key, enter “20000” (U.S.), “10000” (other area: English), “40000” (other area:
German), “50000” (other area: French), “60000” (other area: Spanish) and press the <OK> key.
ID & IP ADDRESS
Terminal ID ENTER ID
IP ADDRESS AUT
O
OK? Ye
s
——— Terminal ID: 1 ~ 32
——— Press <YES> to continue.
Enter terminal ID and IP address
• Case 1: Terminal ID = “1”
Init Sw
IP ADDRESS MANUAL
192.168. 0. 1
DHCP SERVER
OK? Ye
s
——— Enter IP address if you want to change.
——— Select “CLIENT”, if you want to use this terminal as a
DHCP client.
——— Press <YES> to continue.

Casio QT-6100 Specifications

General

Brand	Casio
Model	QT-6100
Category	Cash Register
Language	English