CASTLE S SERIES CONTROLLER – TECHNICAL OPERATION GUIDE
d. Out Location Code
A value of 00-99 is allowed. This value determines the door Out Location Code of the Door.
This setting will be used when the Anti-PassBack Mode at the Parameter Menu is ON.
Example setting of Anti-Passback: -
DOOR NO IN LOCATION OUT LOCATION
DOOR 1 01 02
DOOR 2 01 02
DOOR 3 02 03
DOOR 4 01 03
e. Emergency PIN
4 digits of number are required to set the emergency PIN. When the controller is down, user can
use this PIN number to access the door through the entry reader.
f. Auto-lock Release TimeZone
A value of 00-99 is allowed. This item is used to set the electric lock automatically released
within the TimeZone setting.
g. Card + PIN TimeZone
A value of 00-99 is allowed. This item is used to set the reader to prompt the card user for PIN
number after the user swipe a valid card. This option will be activated within the TimeZone
setting.
CASS TECHNOLOGY SDN BHD(338857-X) 17