© CCV GmbH - It is not allowed to duplicate or distribute this document without our agreement.
5.7.8 Contacted reader SCR-C
The SCR-C, SCR-C NB (new bezel) and SCR-C NBS (new bezel with shutter) is a hybrid card
reader for all common card types.
The integration into tank machines, vending machines as well as further machines in
connection with the outdoor-terminal OPP-B50 are the ideal fields of use. The SCR-C has
three LEDs for the communication with the user.
Following the technical data and interfaces of the SCR-C are described.
Notice
The SCR-C must be grounded by a grounding wire (min. diameter 2.5 mm²) at one of the four
mounting screws
In case of power disconnection or a software crash, the card can be pulled out of the reader
against resistance.
5.7.8.1 Certificates
The certificates for pollution control and waste prevention are also listed below.
• ZKA TA 7.1 and DC POS 2.5
• leant to the EVA-CVS specifications for unattended terminals
• PCI 2.1 in connection with the OPP-B50 and PCI 3.1 with the OPP-C60 (expertise by
T-Systems)
• EFT-POS C-TAP conform
• PCI+ conform (Dutch domestic)
• eft/pos 2000 conform
• MasterCard TQM Label
• EMVL1 Type Approval
• EMVL2 Type Approval
• CE-Approval
• RoHS compliant
• WEEE
5.7.8.2 Connection
Connection to OPP-C60 / OPM-C60 Connector: RJ45 8-poles, shielded
To Next Page
Loading...
