CCV OPM-C60 - ZVT Supported Commands

OPM-C60/OPP-C60
System Manual
PA72P002_en
Edition: 40
Page 61 - 68
Product specific instructions
Confidential
© CCV GmbH - It is not allowed to duplicate or distribute this document without our agreement.
6.4.1.16 ZVT supported commands
For detailed information for each command of the ZVT ECR protocols please see the ZVT
ECR protocol specification that can be downloaded under www.zvt-kassenschnittstelle.de.
Direction
Comm.
Name
Features
→ A
04 0F
Status information
→ A
04 FF
Intermediate status
→ T
05 01
Status poll
From the optional BMP 03 "Service
byte" only Bit 1 (Value 2, SW-Version
not in the final command to send) is
evaluated.
→ T
06 00
Registration
An existing TLV-container is not
evaluated, but only used to unlock
the TLV-container functionality.
→ T
06 01
Authorization
→ T
06 02
Log-Off
→ A
06 0F
Completion
→ T
06 12
Print Turnover receipts
→ T
06 1B
Set / Reset Terminal ID
→ A
06 1E
Abort (from Terminal)
→ T
06 20
Repeat receipt
The optional BMP 03 "service byte" is
not evaluated by OPP-C60.
→ T
06 22
Pre-authorization /
Reservation
→ T
06 23
Partial-Reversal of a Pre-
Authorization / Booking of a
Reservation
→ T
06 24
Book total
→ T
06 25
Pre-Authorization Reversal
→ T
06 30
Reversal
only possible with attended terminal
types
→ T
06 31
Refund
BMP 0E< expiration date>, 22<Card
number>, 2D<Trace 1 Data, 24<Trace 3
Data>, 06<TLV-Container> will be
evaluated by the OPP-C60, if the
evaluation of the TLV Container was
activated with the login.
→ T
06 50
End-of-Day
→ T
06 70
Diagnosis
→ T
06 93
Initialization
→ T
06 B0
Abort
→ T
06 C0
Read card
→ A
06 D1
Print line
→ A
06 D3
Print text block