© CCV GmbH - It is not allowed to duplicate or distribute this document without our agreement.
1 Purpose
This specification details the integration of the terminal OPP-C60 into vending machines.
2 Scope
Customer, Integrators, Net Provider, (CCV-EW, SA, PM)
3 Terms and Abbreviations
BMP Bitmap, pre-defined data field
COR Contactless Only Reader
DK Deutsche Kreditwirtschaft (formerly ZKA; http://www.die-deutsche-
kreditwirtschaft.de/)
OPM Outdoor Payment Module: This terminal is a multifunctional Terminal. It
has no display or keyboard within the machine.
OPP Outdoor PIN-Pad is a secure multifunctional terminal for installation in
machine for indoor and outdoor use.
COR-Bxx describes the contactless only reader combined with a chip reader
COR-Cxx describes the contactless only reader
OPP-C60s OPP-C60
Standard
with front cut-off 199*140mm (OPP-A40/B50)
OPP-C60c OPP-C60
Compact
with front cut-off 141*92mm
OPP-C60m OPP-C60
7000
with front cut-off 196*132mm
PM Product Management
SA Sales
SCR Secure-Card-Reader
TA Tankautomat (Auto fuel terminal)
TKS Terminal Configuration Server (Server responsible for software-updates)
TS3 Terminal Supervisor 3
WA Warenautomat (Vending Machine)
ZKA Zentraler Kreditausschuss (look at DK)
SAM Merchant Secure Access Module
RDT/DFÜ Remote Data Transmission
nWAKE negative Wakeup signal (bidirectionally (input and output): Each
connected MDB device can pull this line low to wakeup all other devices
on the bus
EMC Electromagnetic compatibility
4 Responsibilties
The Product Management group (PM) is accountable for the maintenance of this specification.
To Next Page
Loading...
