© CCV GmbH - It is not allowed to duplicate or distribute this document without our agreement.
6.2.8 USB-A
USB 2.0 Host (Full Speed 12Mbit/s):
USB-A; straight connector (exp. for connecting a USB-to-ISDN adapter, GPRS Dongle,
USB memory sticks…)
6.2.9 GPRS Dongle (optional)
An optional GPRS Dongle is available for the mobile use of the terminal. The dongle is
connected to the terminal over the serial port or USB port. The settings for GPRS can be
viewed or changed with the TS3 service tool.
Notes for the GPRS APN
The actual location is shown by the location area identity (LAI = MCC + MNC + LAC). With this
the mobile country code (MCC) is used as home country prefix. The home country prefix is
used to distinguish the home country from foreign countries.
If international roaming is activated, the home country prefix will not be interpreted.
To Next Page
Loading...
