CCV OPM-C60 - Page 60

OPM-C60/OPP-C60
System Manual
PA72P002_en
Edition: 40
Page 60 - 68
Product specific instructions
Confidential
© CCV GmbH - It is not allowed to duplicate or distribute this document without our agreement.
Key slot
(BMP D3)
PIN-Data (BMP D1)
Algorithm
key (BMP D0)
Card
22
8 Byte binary
0
Scheidt&Bachmann
Track 3
13
19 Bytes BCD: Track 2 Pos 2-38, Ziffer F.
If Track 2 Pos 30 = 4: additional 2 Bytes BCD:
4-digit drivers code.
11
Eurotraffic -
Fina; Total;
TotalProfi;
TotalDirekt
14
reserved for
Eurotrafic
15
8 Byte PIN-Block
0
Ratio
16
8 Byte BCD: Track 2 Pos 4 –7, S1-6, K1-6
under W-D Spec., 2 Byte BCD: PIN-Offset
Track 2 Pos 29-32
2
Wayne-Dresser
17
6 Byte BCD: Track 2 Pos 8-19, 2 Byte BCD
Track 2 Pos 22-25, 2 Byte BCD Track 2 Pos
29-32
2
Avia
18
Unknown
Tokheim
19
Unknown
Task
20
18 Byte BCD: Track 2 Pos 5-20, 30-33,22-
25,34,6,7,26,11-14, number 0, Track 2 Pos
36-38
37
EuroShell
21
reserved for
Euroshell
22
8 Byte binary
0
EL_ME Key
23
8 Byte BCD: Track 2 Pos 5-20, 2 Byte BCD:
Track 2 Pos 28-31
2
GAZ
24
8 Byte BCD: Track 3 Pos 4-19, 3 Byte BCD:
Track3 Pos 46-51
3
BICA
26
8 Byte binary, 2 Byte PIN-Offset BCD
2
Minera
27
8 Byte BCD: Track 2 Pos 3-18, 2 Byte BCD:
Track 2 Pos 27-30
2
TOTAL-Servicecard
BMP D3 can also be used for implementation of new fleet or station cards without changing
the software. The only requirement is that the used algorithm has been implemented. An
insertion of the new key will last to use the card.
Certain fleet cards (Routex, Euroshell) are using a Bonus / Malus system, which is forcing an
initialization to the host in error cases. Until this has been performed, PIN-checks will be
denied for this card type.