OPM-C60/OPP-C60
System Manual
PA72P002_en
Edition: 40
Page 67 - 68
Product specific instructions
© CCV GmbH - It is not allowed to duplicate or distribute this document without our agreement.
Edition overview for this document:
• Added max. viewing angle of the COR
display
• Added steps for startup over ZVT protocol
• Added TLV tags for terminal startup over
ZVT protocol
Added new OPP interface label
Added warning information for software update
Added declaration of conformity for COR reader
Added meaning of power and status LED
Added information for optional GPRS module
Added information for Reconciliation with closure
Information about COR-Ax and COR-B20 added
Added information about fleet and station cards
Added technical information about SCR-B
Changed input voltage information of COR reader
Changed information for shock and vibration
Changed information for grounding of the SCR-B
Added information about the COR ferrite
Added MDB connection cable
Added notices for the short-circuit proof or the
interfaces
Added actual CE declaration of conformity and EMV
certificates
Added information for USB OTG connection
Added information about LED status indicators at
SCR-B and SCR-C
Old command “06 87 - PIN-Verification for Customer-
Card” deleted (not supported by SECpos Evo).
Mounting connection COR
CE-Certification updated
Terminal Security State (TSS) added
POS wiring diagram for low power 2 revision added
Mounting connection SCR-C
To Next Page
Loading...
