Cellink BIO X6 - Page 4

BIO X6 User Manual v. 1.0 4
4.3.7 Photocrosslinking tab 43
4.3.8 Update Printer tab 44
4.3.9 About tab 45
4.4 Bioprinting from a 3D model 46
4.4.1 Print surface 47
4.4.2 Model 49
4.4.3 Layer settings 52
4.4.4 Printhead settings 56
4.4.5 Printer settings 58
4.4.6 Summary 60
4.4.7 Calibration and Automatic Bed Levelling (ABL) 62
4.4.8 Automatic calibration 63
4.4.9 Manual calibration 66
4.4.10 Printing model 71
4.4.11 Manual photocrosslinking  Model 74
4.5 Bioprinting droplets 75
4.5.1 Print surface 76
4.5.2 Droplet 77
4.5.3 Printhead settings 78
4.5.4 Printer settings 80
4.5.5 Summary 82
4.5.6 Calibration and Auto Bed Levelling (ABL) 84
4.5.7 Printing droplets with multiple heads 87
4.5.8 Manual photocrosslinking  Droplet 90
4.6 BIO X6 Protocol Parameter Guidelines 91
4.6.1 BIO X6 Protocol Parameter Guidelines Protocol aim 91
4.6.2 Background 91
4.6.3 Parameters in DNA Studio 91
4.6.4 Helpful hints and troubleshooting 92
5 Gcode Editor 95
5.1 Launching the Gcode Editor 96
5.2 Gcode Editor menu options 97
5.3 View options 99
5.4 Find and replace 100