CENNTRO LOGISTAR 400 - Page 149

4
Maintenance
138
Maintenance
Items
S/
N
Work content
Technical requirements
Harness
10
Check the
The harness connectors at all
harness with
parts shall be fixed reliably, with
sectional area
good insulation, and the lines
more than
16 mm
2
shall be fixed reliably without
interference and friction.
11
Check the
The connectors of the main
harness
harness and chassis harness
connector
shall be connected reliably
without looseness, falling off,
damage and dirt; there is no
looseness, falling off, damage
and dirt in the connector of
main harness and top frame
harness;
The butt connectors of the
main harness and motor
electric control harness shall
be connected reliably without
looseness, falling off, damage
and dirt;
The harness shall have good
insulation, and the lines
shall be fixed reliably without
interference and friction;
Focus on checking the harness
connector (harness on the
motor) close to the heat source
for looseness, falling off,
damage and dirt.
12
Check the
The harness connection and
sealing of
all parts in the driver's lower
the electrical
compartment and battery
compartment
compartment shall be kept dry.
13
Check the body
The grounding wires of all
grounding wire
electrical appliances and
vehicle electrical systems
shall be fixed reliably without
looseness, and the harness
insulation shall be good.