• Reasonable gear selection can improve the power and economy of the
whole vehicle.
• When the vehicle is started, the transmission operates in the neutral position
for 3 to 5 minutes, and the gears, synchronizers and bearings of each gear
are fully lubricated through the gear rotation splash.
• Try to avoid emergency braking in high gear during driving to avoid gear
damage.
• Do not open the VCU housing of the electronic control unit.
• Do not disassemble the actuating motor.
• Do not connect to high-voltage power supply.
• Do not enter the high intensity magnetic field area.
• Keep away from ignition sources.
• Do not supply power directly to the actuating motor.
• Do not store in a humid environment for a long time.
• When the single battery supply voltage is less than 9 V, the power supply
must be replaced.
• When the vehicle cannot move, the fault judgment method related to AMT is
as follows:
» Please first make sure that the shift lever is not in forced neutral.
» Please confirm that the shift lever is powered on and correctly indicate the
corresponding gear.
» Please confirm whether the instrument display correctly displays the
LIFE value of AMT transmission. If not, please check whether the CAN bus
connection is normal.
» If all the above are normal, but the vehicle still cannot move, please
contact a professional to determine the fault.
To Next Page
Loading...
