CENTURION SYSTEMS VANTAGE - Wiring Diagram Symbols

page 15www.CentSys.com
WIRING DIAGRAM SYMBOLS SECTION 4
4. Wiring Diagram Symbols
The Wiring diagrams depicted on the following pages show the wiring of the VANTAGE/
VERT-X/VECTOR2 Master and Slave Motors back to the V-Series Controller, as well
as the wiring of the most commonly used ancillary devices to the V-Series Controller.
Where applicable, an icon has also been provided to indicate whether the connection
shouldbeNormally-OpenorNormally-Closed.
The icons used as well as their denotive meanings are given in the following section.
Symbols
N/C
COM
Connect wire here
Connect wire here
N/O
Connect wire here
Connect wire here
COM