31 – Monitoring T2S - ETH User Manual – v1.4
Graphical User Interface
• Regional settings
Language: user can select
a language among those
installed. See files menu
Sitename: it’s a standard
string which is displayed in
the banner.
Location: Location is the
Place where the system is
installed.
Auto logout delay: number
of seconds after which
any user will have to login
again.
When set to 0, auto-logout
is disabled. A maximum
value of 6000 seconds can
be configured for Auto-logout option.
Keyboard layout: useful when using a Catena with the T2S ETH for in-display keyboard. It has two
options AZERTY and QWERTY
New module identier: Always Ask, Always replace and Never Replace are the options available for New
Module Identifier.
Home page: Two different home page layouts are available One is the Classic home page and the default
other is the Alternate home page.
Display format: DD/MM/YYYY, YYYY/MM/DD, MM/DD/YYYY are the different display format available
Time format: 24 Hours and 12 Hours options are available.
Temperature format: Celsius and Fahrenheit options are available.
• NTP Server
NTP Server: System date and
time can be synchronized with
NTP server. NTP configuration
parameters
IP Address of NTP server
Port Number
Time zone offset
Auto-refresh
Synchronization interval
(days)
Force Synchronization.
To Next Page
Loading...
Need help?
General