CE+T Power T2S-ETH - Page 38

38 – Monitoring T2S - ETH User Manual – v1.4
Graphical User Interface
• Other
 Remote OFF disable AC
power.
 Walk in mode time.
 Airco mode.
 Force start without T2S.
 No power from AC IN
phase 1
 No power from AC IN
phase 2
 No power from AC IN
phase 3
7.4.10.6 Info
• T2S-ETH
This tab provides information
about the T2S ETH:
 Serial Number
 Software version
 Interface version
 Bootloader version
 MAC Address: In case
of required support, it’s
mandatory to provide
information listed in this
page or a screenshot of it.