For Country Code Selection Usage (WLAN Devices)
Note: The country code selection is for non-US models only
and is not available to all US models. Per FCC regulation, all
WiFi products marketed in the US must be fixed to US
operation channels only.
Customer Information - Part 68 Statement
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the bottom of the device
that contains, among other information, a product identifier in
the format US: FK1DL01AL71WD. If requested, this number
must be provided to the telephone company.
Applicable connector jack Universal Service Order Codes
(“USOC”) for the Equipment is RJ11-C.
A plug and jack used to connect this equipment to the premises
wiring and telephone network must comply with the applicable
FCC Part 68 rules and requirements adopted by the ACTA. A
compliant telephone cord and modular plug is provided with
this product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation
instructions for details.
To Next Page
Loading...
