The REN is used to determine the number of devices that may
be connected to a telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in response
to an incoming call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of
devices that may be connected to a line, as determined by the
total RENs, contact the local telephone company. For products
approved after July 23, 2001, the REN for this product is part of
the product identifier that has the format US:
FK1DL01AL71WD. The digits represented by 0.1 are the REN
without a decimal point (e.g., 03 is a REN of 0.3).
If this Gateway causes harm to the telephone network, the
telephone company will notify you in advance that temporary
discontinuance of service may be required. But if advance
notice isn't practical, the telephone company will notify the
customer as soon as possible. Also, you will be advised of your
right to file a complaint with the FCC if you believe it is
necessary.
The telephone company may make changes in its facilities,
equipment, operations or procedures that could affect the
operation of the equipment. If this happens the telephone
company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.
If trouble is experienced with this Gateway, for repair or
warranty information, please contact:
Check Point
6330 Commerce Drive Suite 120, Irving, Texas 75063
Office Phone Numbers 972-444-6612
To Next Page
Loading...
