Check Point 730 - Page 72

72
5.
For WAN/DMZ interfaces and static, DHCP, PPPoE, PPTP,
and L2TP connection types
Or
For VDSL/ADSL interfaces and IPoE - dynamic IP and IPoE
- static IP connection types over PTM:
• Use connection as VLAN - Select this checkbox to add a
virtual Internet interface.
• VLAN ID - Enter a VLAN ID between 1 and 4094,
Note - Annex L and Annex M systems can only be
configured from the WebUI, not during the First Time
Configuration Wizard.
6.
Click Connect and wait for a connection to be established
before you click Next.
7.
Complete the rest of the First Time Configuration Wizard.
8.
Click Finish.
We recommend that you configure the DNS as Check Point
730/750 Appliance needs to perform DNS resolving for
different functions. For example, to connect to Check Point
User Center during license activation or when Application
Control, Web Filtering, Anti-Virus, or Anti-Spam services
are enabled.
9.
In the Network names(SSID) field, click the arrow to select
a wireless network.
If the network is secure, enter a password. Depending on
the security type, you might need to enter the user name.