Note - If you click Next on the Welcome page, the Zero
Touch settings installation process terminates.
• Page not found - The appliance local IP address may have
been changed by the cloud settings installation. Try
http://my.firewall or consult your administrator for
the new local IP address.
After the gateway downloads and successfully applies the
settings, it does not connect to the Zero Touch server again.
For more information on how to use Zero Touch, see sk116375
http://supportcontent.checkpoint.com/solutions?id=sk116375
and the
Check Point Zero Touch User Guide
.
Retries mechanism:
During cloud activation, there are sometimes temporary issues
which prevent the gateway from activating Cloud Services.
The PWR LED shows the status of the retries mechanism:
Action Power LED Activity
Trying to access Zero Touch
deployment service.
Blinks red (slowly)
Applying configuration fetched from
Zero Touch
Blinks red (rapidly)
Trying to activate Cloud Services Blinks green (rapidly)
Waiting after failure (before retry) Blinks green (slowly)
Cloud Services are activated Solid green
To Next Page
Loading...
