Operating Guidelines Edge/Edge Blanket
3-6
EASI-GLIDE FOWARD-OFF-REVERSE
Switch (option) (B):
Provides motorized support when moving the
unit away from the ironer, allowing operators to
feed small pieces and/or waxing cloths.
Safety STOP button (C):
Perform the same safety functions as the red
safety STOP buttons mounted at the front of the
machine.
3.3 Daily Operating
Procedures
In the daily operation of the unit, it is desirable
to follow consistent operational procedures.
By training operators to follow the same set of
guidelines for daily procedures, operator safety
and efficiency are maximized. This unit requires
only one operator.
General daily routines include:
Start-Up
Interconnected Stop Circuit (option)
Operation Notes
Flatwork Handling
Handling Jams and Misfeeds Safely
Shut-Down
Methods of processing specific flatwork are
covered in the Operating Techniques section,
which follows this discussion of standard
routines.
WARNING
Never run a unit when
ribbons are missing or
broken. Serious damage and
injury could result.
•
•
•
•
•
To Next Page
Loading...
