vii
Safety Symbols
DANGER – High voltage.
Explanation: To avoid injury, death of personnel, or damage to
the instrument, the operator must refer to an explanation in the
instruction manual.
High temperature: This symbol indicates the temperature is now
higher than the acceptable range of human. Do not touch it to
avoid any personal injury.
Protective grounding terminal: To protect against electrical shock
in case of a fault. This symbol indicates that the terminal must be
connected to ground before operation of equipment.
WARNING
The WARNING sign denotes a hazard. It calls attention to a
procedure, practice, or the like, which, if not correctly performed or
adhered to, could result in personal injury. Do not proceed beyond
a WARNING sign until the indicated conditions are fully understood
and met.
CAUTION
The CAUTION sign denotes a hazard. It may result in personal
injury or death if not noticed timely. It calls attention to
procedures, practices and conditions.
ACOUSTIC NOISE INFORMATION
This product has a sound pressure emission (at the operator’s side) < 65dB(A).
To Next Page
Loading...
