Chroma 61705 - Page 89

Remote Operation
8-15
Parameters : A | B
Return Parameters : A | B
[SOURce :] FUNCtion : SHAPe : A
Description : This command specifies the waveform shape of waveform
buffer A.
Query Syntax : [SOURce :] FUNCtion : SHAPe : A?
Parameters : SINE | SQUA | CSIN | DST<01..30> | USR<01..06>
Return Parameters : SINE | SQUA | CSIN | DST<01..30> | USR<01..06>
[SOURce :] FUNCtion : SHAPe : A : MODE
Description : This command selects the mode of the value for the clipped
sine in waveform buffer A.
Query Syntax : [SOURce :] FUNCtion : SHAPe : A : MODE?
Parameters : AMP | THD
Return Parameters : AMP | THD
[SOURce :] FUNCtion : SHAPe : A : THD
Description : This command sets the percentage of THD at which the
clipped sine clips in waveform buffer A.
Query Syntax : [SOURce :] FUNCtion : SHAPe : A : THD?
Parameters : <NR2>, valid range: 0.0% ~ 43%
Return Parameters : <NR2>
[SOURce :] FUNCtion : SHAPe: A : AMP
Description : This command sets the percentage of peak at which the
clipped sine clips in waveform buffer A.
Query Syntax : [SOURce :] FUNCtion : SHAPe : A : AMP?
Parameters : <NR2>, valid range: 0.0% ~ 100%
Return Parameters : <NR2>
[SOURce :] FUNCtion : SHAPe : B
Description : This command specifies the waveform shape of waveform
buffer B.
Query Syntax : [SOURce :] FUNCtion : SHAPe : B?
Parameters : SINE | SQUA | CSIN | DST<01..30> | USR<01..06>
Return Parameters : SINE | SQUA | CSIN | DST<01..30> | USR<01..06>
[SOURce :] FUNCtion : SHAPe : B : MODE
Description : This command selects the mode of the value for the clipped
sine in waveform buffer B.
Query Syntax : [SOURce :] FUNCtion : SHAPe : B : MODE?
Parameters : AMP | THD
Return Parameters : AMP | THD
[SOURce :] FUNCtion : SHAPe : B : THD
Description : This command sets the percentage of THD at which the
clipped sine clips in waveform buffer B.
Query Syntax : [SOURce :] FUNCtion : SHAPe : B : THD?
Parameters : <NR2>, valid range: 0.0% ~ 43%
Return Parameters : <NR2>