Cimbali FAEMA - Page 75

9 10 11
12 13 14
English
23 EN
START WASHING
Empty the container
DQGUH¿OOLW
with fresh water
insert milk pipe
as per instructions
WASH COMPLETED
MACHINE READY
Press the key and wait
until the machine performs
an automatic washing cycle
(approximately 2 minutes).
The message below will appear on
the display:
WASHING IN PROGRESS
The washing cycle has ended
when this message appears on
the display:
Eliminate any remaining washing
solution in the container and add
about 0.7 liters of cold water, leaving
the milk intake tube in the container:
Press the key
; the
message below will appear on
the display:
WASHING IN PROGRESS
The washing cycle has ended
when this message appears on
the display:
Remove the washing container.
Remove the milk intake tube
from the container and reposition the
tube back into the milk container.
Press the key
to return to
the wash cycle screen and the RES
(24) key to return to normal work
mode.
Do not remove the container during the
washing procedure: otherwise, the washing
cycle must be repeated.
Selection block - This occurs after 60’ of functioning
from the preset time if the washing cycle has not taken
place, with the ³%ORFNPLONFLUFXLW´ function enabled (YES)
by the installer.