124
Enter Setup
1560 Series Barcode Scanner User Guide
Note: GS1-128 barcodes start with the FNC1 control character to distinguish themselves
from other uses of Code 128. FNC1 is also used to separate data fields in the
GS1-128 barcodes.
4.11 ISBT 128
You can only configure the scanner to read this symbology or not.
Note: When enabled, it not only can decode single ISBT barcode, but also decode and
concatenates pairs of ISBT barcodes.
*Enable ISBT 128
isable ISBT 128
To Next Page
Loading...
