CipherLab 1562 User Manual

165
Update
Chapter 6
Applying Formats for Data Editin
g
6.2.1 SELECT FORMAT TO CONFIGURE
Start Programming Format
Select one editing format (Format 1~5) and the parameters pertaining to the editing
format can then be configured – applicable code type, data length, matching string &
location, total number of fields, field settings (field-dividing rule), additional fields, and
field transmission sequence.
 Up to five different formats can be specified.
Note: Before you complete the programming of an editing format, if you have the
scanner read any label for parameters other than those pertaining to the editing
format, it will automatically abort the programming process.
End Programming Format
After having configured all the desired parameters, you must have the scanner read the “End
Programming Format” label, which can be located at the bottom of every even page in this
chapter.
End Programming Format
Configure Format 1
Configure Format 3
C
onfigure Format 4
Configure Format 5
C
onfigure Format 2

CipherLab 1562 Specifications

General

Brand	CipherLab
Model	1562
Category	Barcode Reader
Language	English