188
Enter Setup
1560 Series Barcode Scanner User Guide
4) Read the following labels in sequence for the scanner to enter the download mode.
The scanner will respond with beeps to indicate it is ready for downloading.
5) Run the download utility “ProgLoad.exe” on your computer.
1. For the communication settings, select “RS-232” and the correct COM port.
For RS-232, select 115200 bps for baud rate.
For USB Virtual COM interface, ignore the baud rate setting.
2. For the file option, click [Browse] to select the target file for firmware update —
Kernel (K1560_V*.shx)
User program (STD1560_V*.shx)
3. Click [OK].
pdate
nter Setup
ownload
To Next Page
Loading...
