192
Enter Setup
1560 Series Barcode Scanner User Guide
6) Run the download utility “ProgLoad.exe” on your computer.
1. For the communication settings, select “RS-232” and the correct COM port.
For RS-232, select 115200 bps for baud rate.
For USB Virtual COM interface, ignore the baud rate setting.
2. For the file option, click [Browse] to select the target file for firmware update —
Kernel (K3656_V*.shx)
User program (STD3656_V*.shx)
3. Click [OK].
7) The 3656 will automatically restart itself when upgrading firmware is completed
successfully.
8) Read the “Update” label for the scanner to resume its operation (exit the
configuration mode).
pdate
To Next Page
Loading...
