CipherLab 1562 User Manual

14
Enter Setup
1560 Series Barcode Scanner User Guide
The example below shows how to save your settings as “User Default” so that you may
restore user defaults at a later time:
Steps
Action User Feedback if Successful
1 Power on the scanner…
T
he scanner will respond with a long beep
(high tone) and its LED indicator will
become solid red and go off quickly.
2 Enter the Configuration Mode…
T
he scanner will respond with six beeps
(high-low tone repeats three times), and
its LED indicator will be flashing red.
3 Read a Setup label…
For example,
T
he scanner will respond with two beeps
(low-high tone) if reading a normal label.
4 Exit the Configuration Mode…
OR
Same as for Enter the Configuration Mode.
5 The scanner will automatically restart itself… Same as for Power on the scanner.
* When any configuration error occurs...
T
he scanner will respond with one long
beep (low tone).

CipherLab 1562 Specifications

General

Brand	CipherLab
Model	1562
Category	Barcode Reader
Language	English