147
Using Reader Configuration Utility
Features a switch to enable or disable reader scanning ability. When enabled, a light beam
will be sent out from the scanning window each time the trigger (scan key) is pressed.
Notification Settings enables audible, visible and tactile feedback for scanning good read,
which helps notify the user of a successful decoding.
To open Notification Settings page:
1) Open Reader Config as described in Launch Reader Config.
2) Tap Notification Settings.
LED
good read
Selects to enable/disable LED light (left) for
scanning good read. See Status LED for details.
Deselected
(Disabled)
Vibrator
Vibrate when good
read
Enables/disables tactile feedback (vibration) for
good read and sets the duration to vibrate.
0 second
(Disabled)
Beeper
read
Sets the beeper sound for scanning good read.
Users can choose to mute the beeper sound, or
configure the beeper between sounds 1 to 9.
Sound 1
To Next Page
Loading...
Need help?
General
