CipherLab RS31 - Page 173

173
Appendix II
Security Level There are setting options from Level 0 to 3 Level 1
KOREAN 3 OF 5
Korean 3 of 5 Disable
MSI
MSI Enable
MSI Switch to enable MSI decoding. Enable
Length option Sets the length of the MSI symbols to decode.
 One Fixed length (Length 1)
 Two Fixed lengths (Length 1>Length 2)
 Max / Min Length (range: 0-55; Length 1<Length 2)
 Any Length
Max / Min
Length
(4-55)
Verify Check Digit
One check digit is mandatory for decoding MSI barcodes.
Select whether a second check digit should be
verified. If the
check digits are incorrect, the barcode will not be accepted.
 One Check Digit
 Two Check Digits
One Check
Digit
Transmit Check Digit
Decide whether to include the check digit in the data being
transmitted.
Disable
Algorithm
When two check digits are set for verification, two choices
are available for the pair of check digits.
 Modulo10 / Modulo11
 Double Modulo 10
Double
Modulo 10
POSTAL CODE
Australian Postal Enable
Japan Postal Enable
Netherlands KIX Code Enable
US Postnet Enable
US Planet Enable
USPS Postal Enable
UPU FICS Postal Enable
UK Postal Enable
Postal General Preference Enable
US Postal Check Digit
Decide whether to transmit check digit for US Postnet or US
Planet.
Enable
UK Postal Check Digit Decide whether to transmit check digit for UK Postal. Enable
UPC/EAN
EAN-8 Enable
EAN-8 Switch to enable EAN-8 decoding. Enable