Cisco 1552S - Page 123

D-19
Cisco Aironet 1552 Series for Hazardous Locations Installation Guide
Appendix D Access Point Specifications
RF output power 2.4 GHz
• 802.11b (CCK)
– 28 dBm with 2 antennas
• 802.11g (non HT duplicate mode)
– 28 dBm with 2 antennas
• 802.11n (HT20)
– 28 dBm with 2 antennas
5 GHz
• 802.11a
– 28 dBm with 2 antennas
• 802.11n non-HT duplicate (802.11a duplicate) mode
– 28 dBm with 2 antennas
• 802.11n (HT20)
– 27 dBm with 2 antennas
• 802.11n (HT40)
• 27 dBm with 2 antennas
Note Maximum output depends on the regulatory domain in which the access point is installed.
For additional information, refer to the Appendix C, “Channels and Power Levels”.
Table D-1 Access Point Specifications (continued)
Category Specifications