Index
IN-23
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
switch TopN reports
foreground execution 2
overview 1
running 2
viewing 2
system
configuration register
configuration 21 to 24
settings at startup 22
configuring global parameters 3 to 8
System Hardware Capacity 5
system image
determining if and how to load 22
loading from Flash 24
T
TACACS+ 1
TCP Intercept 2
TDR
checking cable connectivity 19
enabling and disabling test 19
guidelines 19
Telnet
accessing CLI 2
Time Domain Reflectometer
See TDR
TopN reports
See switch TopN reports
traceroute, Layer 2
and ARP 2
and CDP 2
described 1
IP addresses and subnets 2
MAC addresses and VLANs 2
multicast traffic 2
multiple devices on a port 2
unicast traffic 1
usage guidelines 2
traffic flood blocking 1
traffic-storm control
command
broadcast 4
described 1
monitoring 5
thresholds 1
traffic suppression
see traffic-storm control
translational bridge numbers (defaults) 6
transmit queues
see QoS transmit queues
trunks 3
802.1Q Restrictions 5
allowed VLANs 11
configuring 8
default interface configuration 7
default VLAN 10
different VTP domains 3
encapsulation 3
native VLAN 10
to non-DTP device 4
VLAN 1 minimization 11
trust-dscp
see QoS trust-dscp
trust-ipprec
see QoS trust-ipprec
tunneling 4, 32
tunneling, 802.1Q
See 802.1Q 1
U
UDE 1
configuration 3
overview 2
UDE and UDLR 1
UDLD
default configuration 3
To Next Page